Product Details
Product Description
310S stainless steel Steel Is austenitic stainless steel, with Energy resistance, immunity Corrosive, as of this proportion of nickel and chromium, thus combat power functioning at temperatures that are higher, together using temperature immunity.
Due to the Elevated nickel (Ni), chromium (Cr) content, with good resistance To oxidation, rust resistance, acid and alkali, higher temperature performance, high temperature resistant steel pipe applied in the production of electric furnace tubes as well as different instances, austenitic stainless steel to boost carbon Content, due to its solid answer strengthening to boost the strength of austenitic stainless steel compound makeup predicated on chromium, nickel-based inclusion of molybdenum, tungsten, niobium and titanium along with different aspects, due to its business of face-centered cubic construction, Thus at elevated temperatures possess elevated strength and creep strength. Melting point 1470℃, 800℃started to soften, allowable pressure continued to decrease.
310 stainless steel Comes with a carbon Material of 0.25 percent, whilst 310S stainless steel has a minimal carbon material of 0.08%, and the other chemical parts are equivalent. Therefore, the potency and hardness of stainless steel are far high and also the rust resistance is significantly more worse. The resistance of 310S stainless steel is better and the strength is a little decrease. 310S stainless steel is tough to smelt as a result of its low carbon material, or so the cost is comparatively large .
The differences are summarized as follows:
1. The compound makeup is currently 3-10. The carbon material is. 0.15% and also the 310S demand is 0.08 percent. Additionally, in addition, he takes the MO part in order significantly less than equal to 0.75 percent.
2. Floor hardness in conditions of strength. 310 is higher Compared to 310S
3. The Immunity 310S is greater Compared to 310 Mainly Since 310S adds MO
4. The high temperature resistance 310S of Exactly the Same processing Requirements is Far Better than 310
Production Rang :
-310s Cold Rolled Stainless Steel Sheet and Plate , Cold rolled 310s sheet, Cold rolled 310s Plate
Thickness: 0.2mm - 3.0mm
Thickness: 3.0mm-8.0mm, special for cold rolled
Width: 300mm - 2000mm, the narrowed products pls check in strip products
Length: 1000mm-6000mm
Finish: 2B, 2D
-310s Hot Rolled Stainless Steel Sheet and Plate , Hot Rolled 310s Sheet, Hot Rolled 310s Plate,310s PMP, 310s CMP
Thickness: 1.2mm - 200mm
Width: 300mm - 3200mm
Length: 500mm – 12000mm
Finish: Black, NO.1, Anneal pickling
310s Grade description in different standard
ISO Name |
ASTM |
DIN / EN |
JIS |
GB |
Other |
X12CrNi23-12 |
S31008
310S
|
1.4951 |
SUS310S |
S31008 |
06Cr25Ni20 0Cr25Ni20 |
310s Grade Chemical component in different standard
310s |
C % |
Si % |
Mn % |
P % |
S % |
Ni % |
Cr % |
Mo % |
N % |
Cu % |
ASTM |
0.08 |
1.50 |
2.00 |
0.045 |
0.030 |
19.0-22.0 |
24.0-26.0 |
- |
- |
- |
DIN/EN |
0,10 |
1,50 |
2,00 |
0,045 |
0,015 |
19,0-22,0 |
24,0-26,0 |
- |
0,10 |
- |
JIS |
0.08 |
1.50 |
2.00 |
0.045 |
0.030 |
19.0-22.0 |
24.0-26.0 |
- |
- |
- |
GB |
0.08 |
1.50 |
2.00 |
0.045 |
0.030 |
19.0-22.0 |
24.0-26.0 |
- |
- |
- |
310s mechanical property in different standard
310s |
Y.S./Mpa ≥ |
T.S./Mpa ≥ |
E.L./% ≥ |
HB ≤ |
HRB ≤ |
HBW ≤ |
HV ≤ |
ASTM |
205 |
515 |
40 |
- |
95 |
217 |
- |
JIS |
205 |
520 |
40 |
187 |
90 |
- |
200 |
GB |
205 |
515 |
40 |
- |
95 |
217 |
220 |
Production Process and Feature
310 stainless steel (national identify: 0Cr25Ni20): Austenitic steel using good oxidation resistance, processability and welding performance. As a result of tissues that was reasonably stable and also elevated nickel content, it is medicated by solid solution. High fever resistance.
310S Heat-resistant stainless steel, is still a variant of 3-10 stainless steel, S for specific purposes. Domestic grade 0Cr25Ni20, American grade 310Sknown as 2520, duplex stainless steel, such as high temperature furnace tube manufacturing. 310S stainless steel pipe has good oxidation resistance and rust resistance, because a greater percentage of chromium and nickel, 310s includes a much greater creep strength, can keep on working in elevated temperatures, even with high temperature immunity.
310S stainless steel maximum running temperature of 1200 °C use temperature of 1150 °C. Uses: Exhaust pipes, high-temperature furnace Conditioning, microwave ovens, cremators along with steels which want heat resistance temperature touch parts.
Corrosion resistance
The 310S may be used between 15% and 50% linoleic acid. (Due to the high heat resistance in elevated temperature environments, material properties Won't diminish
Heat resistance, Wear resistance
Because 310S features a higher melting point than 316L, it's much far a lot more wearable compared to 316L in high-temperature friction environments.
Application
Commonly Utilised in the manufacture of steam, Boilers, steam turbines, industrial furnaces and air, petro chemical and other industrial pieces of the parts at elevated temperature.
That the 310/310s material Can Be used as Sexy Position for marketplace program you'll find a few services and products as wrapped, it could be forced to tubing.
http://www.huaxiao-stainless-steel.com/
Company Profile
