Product Details
Introduction
This SMA PCB connector has an interface type of edge mount which provide higher frequency of 26.5 GHz. Brass body is plated with 10 u" gold and Beryllium Copper contact pin is plated with 30 u" heavy gold. SMA Jack Edge Mount Type connectors are good for PCB side connection especially in test application, which is easy to be connected to SMA cable assemblies, and provide better performance.
Specification
Electrical |
● Impedance: 50 Ω |
● Insulation Resistance: 5000 MΩ Min |
● Frequency Range: DC – 26.5 GHz |
● Dielectric Withstanding Voltage: 500 Vrms Min (Sea Level) |
● VSWR: 1.30 Max @ 26.5 GHz |
● Contact Resistance: ≤ 3 mΩ (Center Contact) |
● Insertion Loss: ≤ 0.31 dB @ 26.5 GHz |
≤ 2 mΩ (Outer Contact) |
Mechanical |
● Mateable with 3.5 mm, 2.92 mm, SMK, K Series |
● Center Contact Retention Force: 6 lbs Min |
● Durability: ≥ 500 Cycles |
● Coupling Torque: 7-10 lb-in Recommended |
Environmental |
● Temperature Range: -65 ℃ to +165 ℃ |
Material & Finish |
● Body: Brass, 10 μ" Gold |
● Dielectric: Engineering Plastic, Natural |
● Center Contact: Beryllium Copper, 30 μ" Gold |
Features and Benefits
● Heavy Gold Plated Beryllium Copper Contact inside
● Easy to solder on PCB by hand
● Edge Mount Design
Applications
● PCB Signal integrity analysis
● Labs Test
● High Speed products' test
● Antenna Test
Outline Drawing
Related Product
Hualink PN |
DESCRIPTION |
Picture |
SMA-S-P-HMM-ST-EM0120-W1 |
SMA Female Straight Edge Mount PCB Connector with .012" pin |
|
SMA-S-P-HMM-ST-EM0120-W2 |
SMA Female Straight Edge Mount PCB Connector with .012" pin |
|
SMA-P-P-HFF-ST-EM0500-01 |
SMA Male Straight Edge Mount PCB Connector with .030" pin |
|
SMA-S-PB-HHF-ST-EM0500-02 |
SMA Male Straight Edge Mount PCB Connector with .030" pin |
|
FAQ
1. Interface type of RF Connectors
■ Thread interface
Thread interface is characterized by connecting the most reliable, high mechanical strength, good vibration resistance. Due to the mechanical properties of electrical performance for better testing instruments, military aviation. Common thread connector has SMA, Type N, 2.92 mm (K connector), 2.4 mm, 1.85 mm (V Connector) 1.0 mm, 7/16, etc...
■ Bayonet Interface
Bayonet type connector has characteristics as rotated 90 degrees locking, connection speed, and stability. It is suitable for frequent handling equipment, widely used in network systems, instrumentation, and other fields. The BNC series is a typical bayonet connector.
■ Push type
Push type interface is characterized by rapid connection and separation, small volume, lightweight. For the shell plate to plate connection, high-density mounting. Common type connector has SMB, MCX, MMCX, SMP(GPO), SMPM (GPPO, SSMP), QMA, 1.0/2.3 etc.
Packaging, Shipping
http://www.connectorrf.com/